Milk or Whey powder and Non-Dairy Creamer Spray Dryer

In Stock

SKU: 258
Posted in .

Product introduction
  Spray drying is the technology most widely used in the liquid technology s haping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as:solution, emulsion, suspension and pump able paste states,For this reason,when the particle size and distribution of the ­nal products,residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
Working Principle
  After been ­ltered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly . Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely ­ne mist liquid beads.Through the very short time of contacting
the heat a it,the materials can be dried into the ­nal products.The ­nal products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower .
Characteristics
◎The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air ‑ow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.
◎ Its ­nal products own the good uniformity, ‑ow ability & solubility. And the ­nal products are high in purity and good in quality .The producition procedures are simple and the operation and control are easy .The liquid with moisture contents of 40-60%(for special materials,the contents might be up to
90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.
◎The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and managment.
Material to be dried
Fatty milk powder ,protein,cocoa milk powder,substitute milk powder ,egg white(yolk),whey powder,Non-Dairy Creamer。

Technical Parameter

model
item parameter

5

25

50

150

200-2000

inlet temperature

140-350 automatic control

outlet temperature

80-90

Max.evaporated
amount of moisture
(kg/h)

5

25

50

150

200-2000

drving form of 
cuntrifugal nozzle

compressed air drive

mechanical drive